Guides

What Size Should a QR Code Be? Print Size Guide

Make a QR code about one tenth as wide as its scanning distance: 2.5 cm (1 in) for 25 cm away. Size chart for cards, flyers, posters, signs and billboards.

By the myqr team · · 7 min read

The short answer

  • Use the 10:1 rule: a QR code should be about one tenth as wide as the distance it's scanned from.
  • About 2 cm (0.8 in) is the practical minimum, and only for codes that hold a short link.
  • More data, a logo, glossy or curved surfaces and poor light all mean you should go bigger.
  • Print SVG files, keep a blank quiet zone around the code, and test a printed proof from the real distance.

A QR code should be about one tenth as wide as the distance it will be scanned from. A code scanned from 25 cm (10 in) away, like on a business card, needs to be about 2.5 cm (1 in) wide, and a poster read from 1 m (3 ft) away needs a code about 10 cm (4 in) wide. Go bigger if your code holds a lot of data, carries a logo or will be printed on a tricky surface.

This guide gives you a size table for common print jobs, explains the factors that push the size up or down, and shows how to test before you print.

How do you calculate QR code size?

Divide the scanning distance by 10. That's the 10:1 rule, and it's the standard rule of thumb for print.

  • Metric: scanning distance in cm ÷ 10 = minimum code width in cm
  • Imperial: scanning distance in inches ÷ 10 = minimum code width in inches

So if people will stand 2 m (about 6.5 ft) from your window sign, the code should be at least 20 cm (about 8 in) wide. "Width" here means the code itself, not counting the blank margin around it.

The rule assumes a simple code, like one holding a short link, printed with good contrast on a flat surface. It's a starting point, not a guarantee, so always test a printed proof.

QR code size chart for common print uses

Here are typical scanning distances and the minimum width the 10:1 rule gives for each. Where people's distance varies, size for the far end of the range.

Where it's printedTypical scanning distanceMinimum code width
Business card20 to 25 cm (8 to 10 in)2 to 2.5 cm (0.8 to 1 in)
Flyer or brochure30 cm (12 in)3 cm (1.2 in)
Table tent or counter card50 cm (20 in)5 cm (2 in)
Poster on a wall1 to 2 m (3 to 6.5 ft)10 to 20 cm (4 to 8 in)
Window decal1.5 to 3 m (5 to 10 ft)15 to 30 cm (6 to 12 in)
Yard sign2 to 3 m (6.5 to 10 ft)20 to 30 cm (8 to 12 in)
Billboard10 to 20 m (33 to 66 ft)1 to 2 m (3.3 to 6.6 ft)

A few notes on the trickier rows:

  • Business cards: about 2 cm (0.8 in) is the practical minimum for a code holding a short link. Don't go smaller, even if the design looks cleaner.
  • Yard signs: people often read the sign from the sidewalk or a parked car, then decide whether to walk up. Size for the sidewalk. Our real estate QR code guide covers sign placement in more detail.
  • Billboards: nobody can safely scan a code from a moving car. A QR code on a billboard only makes sense where people stand still nearby, like a transit platform or a stadium concourse.

Why does the amount of data change the size you need?

The more data a QR code holds, the more modules (the small black and white squares) it needs, and the smaller each module becomes at the same printed width. Smaller modules are harder for a camera to pick out, especially from a distance or in poor light.

QR codes come in sizes called versions. According to Denso Wave, the inventor of the QR code, version 1 is 21 × 21 modules, each version adds 4 modules per side, and version 40 is 177 × 177 modules.

In practice, this means:

  • A short link like myqr.sh/menu fits in one of the smallest versions, so each module stays large and easy to scan.
  • A long URL with tracking parameters can need a much denser code. At the same 2.5 cm width, its modules might be half the size.
  • Wi-Fi and contact codes hold more text than a short link. A vCard QR code with a name, title, phone, email and address is dense, so give it more room than the table suggests.

This is one of the real benefits of short links. Every dynamic code encodes a short link no matter how long the destination URL is, so the code stays simple. If you need a static code for a long URL, make it noticeably bigger than the table suggests and test carefully. Our guide to static vs dynamic QR codes explains the difference.

Does error correction affect QR code size?

Yes. Error correction is redundant data built into the code so it can still be read when part of it is damaged, dirty or covered. More error correction means more modules for the same content.

There are four levels:

LevelShare of the code that can be damaged and still scan
LAbout 7%
MAbout 15%
QAbout 25%
HAbout 30%

myqr uses level M by default, which is a good balance for most print. When you add a logo, it switches to level Q so the code still reads with the center covered. A logo makes the code slightly denser, so size up a little, and see how to add a logo to a QR code for the rest.

How much blank space does a QR code need?

A QR code needs a blank margin called the quiet zone on all four sides. The standard quiet zone is 4 modules wide. It tells the scanner where the code starts and stops.

To work out the real number, divide the code's width by the number of modules across. A code 25 modules wide printed at 2.5 cm has 1 mm modules, so it needs about 4 mm of clear space on every side.

When you place a QR code in a design:

  • Don't crop the margin to make it fit.
  • Don't let text, borders or photo edges creep into it.
  • Don't print the code over a busy photo or pattern. Put it on a solid light panel.

If a code looks fine on screen but won't scan in print, check the quiet zone first.

What file format and resolution should you use for print?

Use SVG for print whenever your designer or printer accepts it. SVG is a vector format, so the code stays perfectly sharp at any size, from a business card to a banner.

PNG works for screens and documents, and for print if it has enough pixels. A common print target is 300 pixels per inch. At that density:

  • A 1024 px PNG prints sharply up to about 8.7 cm (3.4 in) wide.
  • A 5 cm (2 in) code needs at least 600 px.
  • A 20 cm (8 in) poster code needs about 2,400 px, so use SVG instead.

myqr lets you download any code as PNG (1024 px), SVG or JPEG. The free QR code generator downloads PNG and SVG. If a printer asks for a PDF or EPS, give them the SVG and they can convert it without losing quality.

Avoid scaling a small PNG up in your design software. Blurry edges between modules make scanning less reliable, and the blur gets worse the bigger you print.

Does the printing surface matter?

Yes, and it can matter as much as size. Things to watch for:

  • Glossy finishes and laminated windows cause glare that can wash out part of the code. Matte is safer, and window decals should be tested in daylight.
  • Curved surfaces like bottles, cups and tubes bend the code away from the camera. Put it on the flattest part and keep it small relative to the curve, or move it to a flat label.
  • Textured paper, fabric and embroidery blur module edges. Go larger than the table suggests.
  • Outdoor signs fade and get dirty. Use durable materials and size up a little to give the error correction room to work.
  • Colored or dark backgrounds reduce contrast. Keep a dark code on a light background; inverted codes (light on dark) don't scan on some older readers.

How to test QR code size before printing

Testing takes ten minutes and can save a whole print run. Here's a simple routine:

  1. Print the design at 100% scale on ordinary paper.
  2. Put it where the real one will go, or at the same height and distance.
  3. Step back to the farthest distance someone will realistically scan from.
  4. Scan with an iPhone and an Android phone, ideally including an older one.
  5. Try it in the real lighting: under restaurant lighting, in a sunny window, at dusk for outdoor signs.

If any phone hesitates, make the code bigger, shorten the data, or improve the contrast. For everything else to check before you send files to the printer, use our QR code checklist before you print.

Frequently asked questions

What is the smallest QR code that will reliably scan?

About 2 cm (0.8 in) wide for a code holding a short link, scanned from close up. Smaller codes can work in ideal conditions, but they fail more often with older phones and poor light.

Is there a maximum size for a QR code?

No. The only limit is practical: the whole code has to fit in the camera frame, so a very large code needs people to stand farther back to scan it.

What size should a QR code be on a flyer?

At least 3 cm (1.2 in) wide for a flyer people hold in their hand. If it will be pinned to a noticeboard and read from a step away, use about 5 cm (2 in).

Do dynamic QR codes need to be printed bigger?

No, usually the opposite. A dynamic code holds a short link, so it has fewer and larger modules than a static code holding a long URL, and it scans well at smaller sizes.