How-to

Can You Change a QR Code After Printing It?

Only if it's a dynamic QR code: edit the destination and every printed copy follows. A static code can't change, but a redirect on your own site can help.

By the myqr team · · 6 min read

The short answer

  • You can change where a printed QR code goes only if it's a dynamic code that points to a short link.
  • In myqr, you edit the code's destination URL and save; the change applies to every printed copy on the next scan.
  • A printed static code can't be changed, but if it points to a page on your own domain, you can redirect that page.
  • If a static code points to someone else's domain, the only fix is to reprint, ideally with a dynamic code.

Yes, but only if it's a dynamic QR code. A dynamic code holds a short link, and you can change where that link sends people at any time, so every printed copy goes to the new page on its next scan. A static code has the destination printed into the pattern and can't be changed, though you may be able to redirect the page it points to.

Which kind of QR code did you print?

Scan the printed code and look at the address your phone shows. If it's a short link from a QR service, such as myqr.sh/menu, it's dynamic and you can change it from that service's dashboard. If it shows your full web address, such as yourcafe.com/menu-summer-2026.pdf, it's static.

If you're not sure what the difference is, our explainer on static vs dynamic QR codes covers it. The rest of this guide splits into two paths, one for each type.

How to change a dynamic QR code's destination in myqr

Changing the destination takes about a minute and doesn't touch the printed code. Here are the steps:

  1. Sign in and open QR codes from the menu.
  2. Find the code. Use search or tags if you have a lot of them.
  3. Open the code by clicking its name. A website code opens on its Destination tab.
  4. Replace the destination with the new page, for example change yourcafe.com/menu to yourcafe.com/winter-menu.
  5. Click Save changes.

That's it. myqr redirects with a temporary (302) redirect and doesn't cache it, so the very next scan of any printed copy goes to the new page. There's nothing to republish and nothing to reprint.

Check the change worked

Scan a printed copy with your phone after saving. You should land on the new page. If you still see the old page, close the browser tab that opened from your last scan and scan again, since the phone may simply be showing the tab it already had open.

Keep your tracking tidy

If you use UTM parameters to see QR traffic in your analytics tool, copy them onto the new destination too, for example yourcafe.com/winter-menu?utm_source=qr&utm_medium=table-tent. Scan history stays with the code in myqr, so you can compare scans before and after the change. See using UTM parameters with QR codes for a naming scheme that stays consistent.

Good reasons to change a printed QR code

Changing the destination is useful far beyond fixing mistakes. Some everyday examples:

  • A seasonal menu moves from yourcafe.com/summer-menu to yourcafe.com/winter-menu, and the table tents stay put.
  • A sold property on a yard sign is repointed to the agent's other listings. More ideas in QR codes for real estate.
  • An event poster points to the ticket page before the event and the photo gallery after.
  • Product packaging sends people to a newer version of the setup guide.
  • A typo in the original destination gets fixed without a reprint.
  • A website rebuild changes your URLs, and you repoint each code to its new page.

Can you change a static QR code after printing?

No. A static code's content is the pattern, so changing the content would mean changing the ink. Whether you can still rescue it depends on one thing: who owns the domain in the URL.

Scan the code and look at the address:

  • It's on a domain you own, like yourcafe.com/menu. You can set up a redirect on your website so that address forwards to the new page. The printed code keeps working.
  • It's on someone else's domain, like a file-sharing link, a social media page or a QR provider's short link from an account you no longer have. You can't redirect it. You'll need to reprint.

How does a redirect on your own website work?

A redirect is an instruction on your website that says "anyone who asks for this address, send them to that one instead." When a phone opens the URL in your static QR code, your website answers with the new address, and the phone loads it automatically. To the person scanning, it just looks like the right page opened.

For example, if your static code holds yourcafe.com/menu-2025.pdf and you've published a new menu at yourcafe.com/menu, you'd add a redirect from /menu-2025.pdf to /menu. MDN's guide to HTTP redirections explains the mechanics if you want the technical detail.

Where to set up a redirect

Most website platforms have a redirect setting, so you usually don't need a developer:

  • Shopify: go to Content, then Menus, then View URL redirects and Create URL redirect, per Shopify's help center.
  • Squarespace: use URL mappings in the Developer tools panel, with a line like /menu-2025 -> /menu 301, per Squarespace's guide.
  • WordPress: a redirect plugin such as the free Redirection plugin lets you add old and new addresses from the dashboard.
  • Other platforms or custom sites: search your platform's help for "301 redirect" or ask whoever manages your hosting.

Permanent or temporary redirect?

Website tools usually offer two kinds of redirect: permanent (301) and temporary (302). Use a permanent redirect when the old page is gone for good. Use a temporary one if you expect to change the destination again, because browsers are allowed to remember a permanent redirect (RFC 9110 calls 301 responses cacheable by default) and some visitors could keep landing on the old target.

In effect, a redirect turns your static code into a basic dynamic one, using your own website as the middle step. You still won't get scan counts, though. Your web analytics will show visits to the page, but can't separate scans from other visitors unless the original URL had tracking parameters in it.

What if you have to reprint?

If the static code points to a domain you don't control, or the redirect isn't possible, reprinting is the only fix. Use the reprint to avoid the same problem next time:

  1. Make the new code dynamic so future changes don't need another print run.
  2. Point it at a stable page on your own site, like yourcafe.com/menu, rather than a dated file name.
  3. Download SVG for print so it stays sharp at any size.
  4. Test-scan a printed proof on an iPhone and an Android phone before printing the full run.
  5. Cover or remove the old codes where you can, so nobody scans a dead one.

If you're running a lot of codes from another provider and want to move them, our guide on migrating QR codes explains how to do it without breaking the ones already in circulation. For codes that have stopped scanning for other reasons, see why did my QR code stop working?.

A note on planning ahead

The cheapest fix is the one you plan before printing. Before any print run, ask: "If this page moves next year, what happens to these copies?"

If the answer is "we'd reprint," and the copies are expensive or hard to replace (signage, packaging, vehicle wraps), use a dynamic code. If the answer is "nothing, the page won't move," a static code is fine. The print marketing guide has more on choosing codes for different materials.

Frequently asked questions

Will people who scanned the old code see the new page?

Anyone who scans after you save goes to the new destination. Someone who scanned earlier and left the old page open in their browser will still see the old page until they scan again.

Does changing the destination change how the QR code looks?

No. With a dynamic code, the short link stays the same, so the pattern stays the same. Only the page it redirects to changes.

Can I change a QR code's colors or logo after printing?

Not on copies that are already printed, since those are ink on paper. You can change the design for future prints, and the old and new versions will both work if they encode the same short link.

How many times can I change a dynamic QR code's destination?

With myqr there's no cap on the number of changes, on any plan. Change it whenever the page you want people to see changes.