Guides
Why Did My QR Code Stop Working? 9 Causes and Fixes
Most QR codes stop working because a plan ended, the linked page moved, or the print is too small, low-contrast or cropped. Diagnose and fix all 9 causes.
By the myqr team · Updated · 8 min read
The short answer
- If the code scans but opens the wrong page, an error or a paused notice, the problem is the link or the service behind it, not the print.
- If the code won't scan at all, the problem is physical: size, contrast, a cropped quiet zone, glare, too much data or an oversized logo.
- Dynamic codes can usually be fixed in a minute by editing the destination; static codes with print problems need a reprint.
A QR code usually stops working for one of two reasons: the link behind it broke (a plan or trial ended, the page moved, or the destination was edited to a bad URL), or the printed code can't be read (too small, low contrast, cropped, glare or too busy). The quickest way to tell which is to scan it. If your phone opens something, the problem is the link; if nothing happens, the problem is the print.
Start here: does the code scan at all?
Point an up-to-date phone camera at the code from a comfortable distance, in good light. On an iPhone, the built-in Camera app reads QR codes; on most Android phones, use the Camera app or Google Lens.
- The phone shows a link or opens a page. The code is readable. Jump to causes 1 to 3, which are about where the code goes.
- The phone shows nothing, or keeps hunting. The code can't be decoded. Jump to causes 4 to 9, which are about the print.
Try a second phone before deciding. A code that works on one phone but fails on another is usually a borderline print problem, not a broken link.
Quick diagnostic table
| What you see when you scan | Likely cause | Fix |
|---|---|---|
| "Paused", "inactive", upgrade or trial-ended page | 1. Trial or subscription ended | Renew the plan, or replace the code |
| "Page not found" (404) or an empty site | 2. Destination page removed or moved | Edit the destination, or redirect the old page |
| A wrong page, an error, or a browser warning | 3. Code edited to a broken URL | Correct the destination URL |
| Nothing, from a normal distance | 4. Too small or blurry | Reprint larger, from an SVG |
| Nothing, on some phones only | 5. Low contrast or inverted colors | Reprint dark on light |
| Nothing near the edges of the code | 6. Quiet zone cropped | Reprint with a clear margin |
| Works at some angles but not others | 7. Glare, curve or lamination | Change the surface or finish |
| Phone has to get very close | 8. Too much data, dense pattern | Shorten the content, use a short link |
| Fails since a logo was added | 9. Logo covers too much | Shrink the logo, raise error correction |
Link problems: the code scans but goes nowhere useful
These three causes only affect what happens after the scan. The printed code is fine, which is good news: with a dynamic code, you can fix all three without reprinting.
1. The trial or subscription ended
How to diagnose: You scan and land on a page from the QR provider saying the code is paused, inactive, expired or needs an upgrade. The URL your phone showed was the provider's short link, not your website.
How to fix: Sign in to the provider and check your plan. Renewing usually reactivates the codes straight away. If you can't or won't renew, the printed codes have to be replaced, since the short link they contain belongs to that provider.
On myqr, if a Pro plan ends, every code keeps redirecting. Codes beyond your 2 oldest become read-only until you resubscribe (no edits, no new scans recorded), but nothing is deleted and printed codes don't break. For the bigger picture on lapses and trials, see do QR codes expire?
2. The destination page was removed or moved
How to diagnose: You land on your own website, but it shows "page not found", a blank page or the home page instead of the page you meant. This often happens after a website redesign, a change of website platform, or when a seasonal page or PDF is deleted.
How to fix:
- Dynamic code: edit the code's destination to the page's new address. Every printed copy follows on the next scan.
- Static code on your own domain: set up a redirect from the old address to the new one on your website.
- Static code on someone else's domain: reprint.
Our guide to changing a QR code after printing walks through both the edit and the redirect.
3. The code was edited to a broken URL
How to diagnose: The code used to work, someone changed its destination, and now it opens the wrong page, an error or a browser security warning. Common culprits are a typo in the domain, a missing part of the path, a link copied from a page that requires a login, or a link to a draft or preview version of a page that was never published.
How to fix: Open the code in your QR service, copy the destination URL and paste it into a browser on your phone (not just your laptop, where you may be logged in). If it fails there, correct it and save. Then scan a printed copy to confirm.
Print problems: the code won't scan
These six causes are physical. The data in the code may be perfect, but the phone can't read the pattern. Most of them need a reprint, so it's worth fixing them on a proof before a print run.
4. Too small or blurry
How to diagnose: The code only scans if you hold the phone very close, or not at all. Up close, the edges of the squares look soft or smudged.
How to fix: A useful rule of thumb is that a QR code scans from up to about 10 times its width. A code 2.5 cm (1 in) wide reads from about 25 cm (10 in); a poster seen from 2 m needs a code about 20 cm wide. Treat about 2 cm (0.8 in) as the practical minimum for a short link, and go bigger for dense codes.
For sharpness, download an SVG for print. SVG is a vector format, so it stays crisp at any size, while a small PNG stretched up gets blurry. Our QR code size guide has more worked examples.
5. Low contrast or inverted colors
How to diagnose: The code is in brand colors, such as light gray on white, yellow on white, or dark blue on black, and some phones struggle. Or the code is light on a dark background (inverted), and older phones or scanner apps can't read it at all.
How to fix: Use a dark code on a light background with strong contrast between the two. Black on white is the safest choice; dark navy or deep green on white or cream also work well. Avoid inverted codes for anything important. If you're designing a custom code, our guide to a QR code with a logo covers colors that keep scanning reliable.
6. The quiet zone was cropped
How to diagnose: The code sits right against a border, a photo or text, or it was trimmed close to the edge of a sticker. The quiet zone is the blank margin around a QR code that helps the phone find where the code begins. The standard is 4 modules wide (a module is one of the small squares in the pattern).
How to fix: Leave a clear, plain margin around all four sides, at least 4 modules wide, and don't place the code on a busy photo or pattern. If a designer resized the artwork, check they didn't crop the margin to fit a layout.
7. Glare, curved or laminated surfaces
How to diagnose: The code scans at some angles but not others, or fails under certain lights. Glossy lamination, shiny packaging, glass, acrylic stands and metal all reflect light into the camera. Codes on bottles, cups or tubes bend away from the camera, which distorts the squares.
How to fix: Choose a matte finish or matte lamination for printed codes. For displays behind glass, test under the real lighting where it will be installed. For curved surfaces, put the code on the flattest part, keep it smaller relative to the curve, or print it on a flat tag or label instead.
8. Too much data makes the code too dense
How to diagnose: The code looks busy, with lots of tiny squares, and phones need to get very close. This happens when a static code holds a long URL with tracking parameters, a long block of text or a full contact card.
How to fix: Put less data in the pattern. A short link, like myqr.sh/menu, needs far fewer modules than https://yourcafe.com/menus/2026/autumn-dinner-menu.pdf?utm_source=qr, so each square can be bigger at the same print size. That's one of the practical benefits of a dynamic code. If you need tracking parameters, put them in the destination rather than in the code. See static vs dynamic QR codes for more on the difference.
9. The logo covers too much of the code
How to diagnose: The plain version scanned fine, and the version with a logo in the middle doesn't, or only scans on some phones.
How to fix: A logo works because of error correction, extra data built into every QR code so it can still be read when part of it is damaged or covered. There are four levels: L (about 7% of the code can be lost), M (about 15%), Q (about 25%) and H (about 30%).
A logo uses up some of that budget, and so does any scuff, glare or print flaw. Shrink the logo, keep a plain margin around it, make sure it doesn't cover the three large corner squares, and use a higher error correction level. myqr does the last part for you: codes use level M, or Q when you add a logo. More detail in our guide to a QR code with a logo.
How to stop it happening again
Most broken QR codes are preventable with a short routine before every print run:
- Use a dynamic code for anything printed in volume, so link problems can be fixed without reprinting.
- Point it at a stable page you control, like
yourcafe.com/menu, rather than a dated file name. - Know your provider's lapse terms and keep the account under an email you'll still use.
- Print from SVG at a sensible size, with a clear quiet zone and strong contrast.
- Test-scan a printed proof on an iPhone and an Android phone, in the real location and lighting.
- Check the code's scans now and then. A code that used to get regular scans and suddenly gets none is worth checking in person. Our guide on tracking QR code scans shows what to look for.